Draytek Vigor 130 Setup NBN (no VLAN)

The Draytek Vigor 130 configuration menu can be accessed from http://192.168.1.1

You will need to have a computer/laptop on the same network to access the modem i.e example 192.168.1.2/24

The default username and password is admin and admin.

When logged on goto Internet Access > General Setup

Under VDSL2 change the “Tag value” to 1

Under Internet Access >> PPPoE / PPPoA menu

Set PPPoE/PPPoA Client to Disable

Under Internet Access >> MPoA / Static or dynamic IP

Set MPoA (RFC1483/2684) to Enable

Encapsulation to 1483 Bridged IP LLC

VPI : 8

VCI : 35

Modulation : Multimode

Bridge Mode : tick “Enable Bridge Mode” and then hit Ok.

Leave a Reply

Your email address will not be published. Required fields are marked *